Ignition, Engine Sensors

Components: 

Fig 1: Identifying Ignition And Engine Sensors

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Hall sender
2. Screw, M6 x 16 → Tightening torque: 10 Nm (7.5 ftlb.) 
3. Engine compartment temperature sensor with rubber sleeve
4. Screw, M8 x 35 → Tightening torque: 23 Nm (17 ftlb.)+/-2 Nm (+/-1.5 ftlb.) 
5. Knock sensor - mark installation position
6. Ignition coil
7. Screw, M6 x 16 → Tightening torque: 10 Nm (7.5 ftlb.) 
8. Spark plug → Tightening torque: 32 Nm (24 ftlb.)+/-2 Nm (+/-1.5 ftlb.) → Tightening torque: 25 Nm (19 ftlb.)+3 Nm (+2 ftlb.) 
9. Oil-pressure sender
10. Screw, M6 x 20 → Tightening torque: 10 Nm (7.5 ftlb.)