Starter And Generator
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Terminal 50 line to starter | Collar nut, M6 | Tightening torque | 6.5 Nm (5 ftlb.) | ||
| B+ line to starter | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) | ||
| Starter | External Torx screw, M10 x 35 | Tightening torque | 45 Nm (33 ftlb.) | ||
| B+ line to generator | Collar nut, M8 | Tightening torque | 18 Nm (13 ftlb.) | ||
| Generator to crankcase/cylinder head | External Torx screw, M8 x 90 | Tightening torque | 15 Nm (11 ftlb.) | ||
| Start/Stop voltage converter to body | Plastic nut | Tightening torque | 2.5 Nm (2 ftlb.) |