Heat Shield, Retaining Frame With Heat Protection
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Upper part of heat shield to cylinder head cover | External Torx screw, M6 x 12 | Tightening torque | 13 Nm (9.5 ftlb.) | ||
| Lower part of heat shield to cylinder head cover | External Torx screw, M6 x 12 | Tightening torque | 13 Nm(9.5 ftlb.) | ||
| Retaining frame to body | Collar nut, M6 | Tightening torque | 7 Nm (5 ftlb.) | ||
| Heat protection for retaining frame to heat shield on bumper | Tapping screw, 4.8 x 19 | Tightening torque | 3 Nm (2 ftlb.) |