| Exhaust manifold to cylinder head |
External Torx screw, M8 x 21 |
Tightening torque |
30 Nm (22 ftlb.) |
|
|
| Exhaust manifold to front silencer |
Collar nut, M8 - replace |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Console to cylinder head |
External Torx screw, M8 x 20 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Holder for rear silencer to cylinder head |
External Torx screw, M8 x 20 (4x) |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Rear silencer to holder for rear silencer |
Collar nut, M8 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Strut to rear silencer |
Collar nut, M8 - replace |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Clamp |
Cheese head bolt, M8 x 50 |
Tightening torque |
15 Nm (11 ftlb.) |
|
|
| Exhaust tailpipe |
Clamp can be replaced |
Tightening torque |
30 Nm (22 ftlb.) |
|
|