LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> 26 - Exhaust System -- 911 CARRERA (991) >> WM 261019 Removing And Installing Exhaust Manifold (Gt3, Gt3 RS) >> Installing Exhaust Manifold

Installing Exhaust Manifold

  1. Clean area -1-  on the cylinder head.
    Fig 1: Identifying Cylinder Head Flange Area
    G09991620Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install exhaust manifold.
    1. 2.1. Fit sealing ring -2-  on the catalytic converter and tighten clamp -3-  .
    2. 2.2. Fit exhaust manifold -4-  with new metal seal -1-  on the cylinder head flange.
      3. Fig 2: Identifying Exhaust Manifold With Metal Seal
      G09991621Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Fit fastening screws -1 to 9-  and tighten according to the specified tightening sequence. Tightening torque 30 Nm (22 ftlb.) 
    Fig 3: Exhaust Manifold Nuts Tightening Sequence
    G09991622Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Tighten clamp -3-  . → Tightening torque: 23 Nm (17 ftlb.) 
    Fig 4: Identifying Exhaust Manifold And Cylinder Bank 1
    G09991623Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals