LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> 19 - Engine - Cooling -- 911 CARRERA (991) >> WM 197819 Removing And Installing Coolant Temperature Sensor (On Coolant Pipe) (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Subsequent Work

Subsequent Work

  1. Fill in coolant.

    → FILLING COOLANT .

    GT3 vehicles:  → 193817 DRAINING AND FILLING COOLANT (INCL. BLEEDING THE COOLING SYSTEM) .

  2. Bleed the cooling system.

    → 190107 BLEEDING THE COOLING SYSTEM (not relevant for GT3 vehicles!)  .

  3. Install underbody panelling.

    → INSTALLING COVER FOR CENTRE UNDERBODY .

    → INSTALLING COVER FOR REAR UNDERBODY .

scientia non olet · About LEMON Manuals