LEMON Manuals
: Even more car manuals for everyone
Home
>>
Porsche
>>
2016
>>
911 Turbo, 2D Convertible
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Blowers, Superchargers & Turbochargers
>>
21 - Exhaust Gas Turbocharging -- 911 CARRERA (991)
>>
WM 214119 Removing And Installing Pressure Pipe (Turbo, Turbo S, Turbo CABRIO, Turbo S CABRIO)
>>
Technical Values
Technical Values
Location
Description
Type
Basic value
Tolerance 1
Tolerance 2
Screw-type clamp to pressure pipe for charge-air cooler
Tightening torque
5.5 Nm (4 ftlb.)
Screw-type clamp securing rubber sleeve for pressure pipe to throttle housing
Tightening torque
5.5 Nm (4 ftlb.)