Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Anti-roll bar clamp to rear-axle cross member (conventional and PDCC anti-roll bar) | Hexagon-head bolt, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Connecting link (PDCC actuator) to anti-roll bar | Collar nut, M12/always use new collar nut following removal | Initial tightening | 50 Nm (37 ftlb.) | ||
| Connecting link (PDCC actuator) to anti-roll bar | Collar nut, M12/always use new collar nut following removal | Final tightening | +50° |