Removing Rear Anti-Roll Bar

Undo the connecting rod (suspension/stabilizer) from the anti-roll bar on both sides of the vehicle. Counter the internal Torx while doing so.

Fig 1: Removing Anti-Roll Bar
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Undo the four screws -3- on the anti-roll bar clamps -1 and 2- and remove the anti-roll bar.
Turn the anti-roll bar as required and remove it in a downwards direction.

Fig 2: Identifying Rear Axle Cross Member Anti-Roll Bar Screws
Courtesy of PORSCHE CARS NORTH AMERICA, INC.