LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991) >> WM 429019 Removing And Installing Rear Anti-Roll Bar (Gt3, Gt3 RS) >> Removing And Installing Rear Anti-Roll Bar >> Removing Rear Anti-Roll Bar

Removing Rear Anti-Roll Bar

  1. Remove anti-roll bar -1-  .
    1. 1.1. Unscrew M8 fastening screws -4-  on the rubber mounting and remove bearing shell (left and right side).
    2. 1.2. Unscrew M10 collar nut -2-  on the connecting link (left and right side). Counter at the Internal Torx screw -3-  while doing this.
      Fig 1: Identifying Anti-Roll Bar Mount
      G09993058Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals