LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991) >> WM 421119 Removing And Installing Lower Trailing Arm (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Removing And Installing Lower Trailing Arm >> Removing Lower Trailing Arm

Removing Lower Trailing Arm

  1. Remove lower trailing arm -arrow-  from the wheel bearing housing.
    Fig 1: Locating Trailing Arm Bolt
    G09992934Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Mark the position of the camber eccentric -1-  .

    Remove camber eccentric -1-  and guide out trailing arm.

    Fig 2: Identifying Rear-Axle Camber Eccentric
    G09992935Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. 3.