| Toe control arm to rear-axle side section |
Toe eccentric adjuster, M12 x 1.5 |
Tightening torque |
100 Nm (74 ftlb.) |
|
|
| Carrier side section to body (rear) |
M12 x 1.5/always use new hexagon nuts following removal |
Initial tightening |
90 Nm (67 ftlb.) |
|
|
| Carrier side section to body (rear) |
M12 x 1.5/always use new hexagon nuts following removal |
Final tightening |
+90° |
|
|
| Carrier side section to body (centre and front) |
M12 x 1.5/always use new hexagon-head bolts following removal |
Initial tightening |
90 Nm (67 ftlb.) |
|
|
| Carrier side section to body (centre and front) |
M12 x 1.5/always use new hexagon-head bolts following removal |
Final tightening |
+90° |
|
|