LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991) >> WM 420619 Removing And Installing Rear-Axle Cross Member (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition", Gt3, Gt3 RS) >> Removing And Installing Rear-Axle Cross Member >> Subsequent Work

Subsequent Work

  1. Fit cover for rear underbody.

    → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .

  2. Fit wheels on rear axle.

    → Installing Wheel .

  3. If the cross member was replaced or if the camber arm screws were loosened, the die wheel alignment values must be checked and adjusted. 

    → 449503 SUSPENSION ALIGNMENT, COMPLETE .

    → 4495TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT .

scientia non olet · About LEMON Manuals