| Brake hose bracket to wheel carrier |
M6 screw |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Wheel bearing assembly with housing to wheel carrier (911 GT3) |
Cheese head bolt, M12 x 1.25 x 45/always use new bolts when re-tightening |
Initial tightening |
80 Nm (59 ftlb.) |
|
|
| Wheel bearing assembly with housing to wheel carrier (911 GT3) |
Cheese head bolt, M12 x 1.25 x 45/always use new bolts when re-tightening |
Final tightening |
+120° |
|
|
| Wheel hub to wheel carrier (tension bolt for rear wheel drive) |
Lock nut, M22 x 1.5/always use new lock nuts following removal |
Tightening torque |
460 Nm (340 ftlb.) |
|
|