Removing Lower Trailing Arm

Dismantle linkage from level sensor (height sensor) on the holder -1- .

Fig 1: Identifying Level Sensor Linkage
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen control arm spoiler (air guide for brake cooling) on the trailing arm and twist up.

Fig 2: Identifying Control Arm Spoiler
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen trailing arm on wheel bearing housing and press out ball joints using special tool Press-out tool 9560 .
To prevent damage to the rubber sleeves of the ball joint, coat the rubber sleeves and the puller in this area with tyre mounting paste.

Fig 3: Disassembling Ball Joint
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove fastening screw of trailing arm on longitudinal arm (diagonal arm).
Remove fastening screw of trailing arm on axle support.

Fig 4: Identifying Axle Support Trailing Arm
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove trailing arm.