LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> 39 - Final Drive - Differential, Differential Lock -- 911 CARRERA (991) >> WM 399519 Removing And Installing Control Unit For All-Wheel Drive (PTM) (CARRERA 4, Turbo, CARRERA 4S, CARRERA 4 GTS, TARGA 4, TARGA 4S, TARGA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. 4 GTS CABRIO, Gt3 RS) >> Installing Control Unit For All-Wheel Drive (PTM)

Installing Control Unit For All-Wheel Drive (PTM)

  1. Plug in electric plug connection -B-  until the connector -3-  engages securely.

    Installing control unit for all-wheel drive (PTM) 

  2. Fit all-wheel drive (PTM) control unit on the holder and push it in under fastening screw -1-  (-A-  ).
  3. Tighten fastening screws -1, 2-  to Tightening torque +10 Nm (+7.5 ftlb.)  .
scientia non olet · About LEMON Manuals