Filling In Oil For Electromagnetic Clutch

Information 

Only use clutch fluid  approved by Porsche .

1. Screw in drain plug with a new sealing ring and tighten it.

   Tightening torque 32 Nm (24 ftlb.) +/-4 Nm (+/-3 ftlb.) 

2. Fill in clutch fluid up to the lower edge of the filler opening.

   → Filling capacity: 0.8 Liter 

3. Screw in filler screw with a new sealing ring and tighten it.

   Tool recommendation: 3/8-inch torque wrench with open-end/ring wrench insert Nr.98-1 Pos.1 

   Same tightening torque as for drain plug! 

4. Remove residual traces of oil from the transmission.