Preliminary Work
WARNING:
Vehicle can fall down
- Risk of squashing or crushing
- Risk of damage to the vehicle
- Do not place any solid objects under the raised vehicle.
- Ensure that the lifting platform is prevented from lowering.
- Remove solid objects before lowering the vehicle.
- Raise the vehicle only at the jacking points provided.
- The outer jacking points should be used primarily.
- Jack and raise the vehicle at the prescribed jacking points.
- 4X00IN Lifting the vehicle.
- Remove underbody cover.
- 519419 Removing and installing cover for rear underbody.
- 519319 Removing and installing cover for center underbody.
- 519219 Removing and installing cover for front underbody.
- Remove cardan shaft.
- 390219 Removing and installing cardan shaft.
- Remove front-axle subframe -1-
.
- 4.1. Unscrew M6 screws -2 -for the coolant pipes.
- 4.2. Unscrew fastening nuts -3 -and M10 screws -4- .
- 4.3. Remove the subframe in a downward direction and disengage the retaining straps for the fuel tank -arrows- .
- 4.4. Remove tray -5 -for fuel tank in a downward direction.