Subsequent Work
- Install support for front final drive.
- Install front final drive.
- Fill in clutch fluid for front final drive.
→ 399055 CHANGING OIL FOR FINAL DRIVE (WITH TRANSMISSION OIL) .
- Install cardan shaft.
Information
- The electromagnetic clutch in the final drive is classified (letter A-L on the final drive housing).
- The letters are engraved at the seventh position from the left. Use a magnifying glass to determine the exact letter if necessary.
- This must be taken into consideration in PIWIS Tester II when replacing the clutch, final drive or control unit.
- If the electromagnetic clutch was replaced, the all-wheel drive (PTM) control unit must be re-programmed.
→ 399519 REMOVING AND INSTALLING CONTROL UNIT FOR ALL-WHEEL DRIVE (PTM) .