Preliminary Work

→ Do not place any solid objects under the raised vehicle.

→ Ensure that the lifting platform is prevented from lowering.

→ Remove solid objects before lowering the vehicle.

→ Raise the vehicle only at the jacking points provided.

→ The outer jacking points should be used primarily.

1. Raise the vehicle at the prescribed jacking points.

   → 4X00IN LIFTING THE VEHICLE .

2. Loosen rear right wheel bolts (do not remove).

   Use special tool socket-wrench insert P300  .

3. Remove cover for underbody.

   → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .

4. Remove right drive shaft on transmission side.

   → 422119 REMOVING AND INSTALLING REAR DRIVE SHAFT .

5. Remove rear right wheel.

   → 440519 REMOVING AND INSTALLING WHEEL .

6. Place oil collection pan under the transmission.