Subsequent Work

Coupe: Install trim panel over spring-strut mount.
→ 708519 REMOVING AND INSTALLING REAR ROOF TRIM PANEL .

→ 705319 REMOVING AND INSTALLING REAR COVER .
Cabriolet: Position strut -1- and tighten fastening screws -arrows- to 46 Nm (34 ftlb.).
Install trim panel for convertible top compartment and rear.

→ 700819 REMOVING AND INSTALLING TRIM PANEL FOR CONVERTIBLE TOP COMPARTMENT .

→ 705319 REMOVING AND INSTALLING REAR COVER .

Move convertible top out of service position.

→ 6101IN CONVERTIBLE-TOP SERVICE POSITION .

Fig 1: Locating Strut Screws (Cabriolet)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Targa: Position strut and tighten fastening screws -arrows- to 46 Nm (34 ftlb.).

Fig 2: Locating Strut Screws (Targa)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position upper strut -2- and tighten fastening nut -1- .

Fig 3: Identifying Upper Strut Nut (Targa)
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install trim panel for convertible top compartment. → 700819 REMOVING AND INSTALLING TRIM PANEL FOR CONVERTIBLE TOP COMPARTMENT (TARGA)
Close rear window.
Fit wheel.
→ Installing Wheel .

→ Installing Wheel With Central Bolt .
Check rear-axle toe and make adjustments if necessary.
→ 449503 SUSPENSION ALIGNMENT, COMPLETE .

→ 4495TW ADJUSTMENT VALUES FOR SUSPENSION ALIGNMENT .