LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 42 Rear Wheel Suspension, Drive Shaft -- 911 CARRERA (991) >> WM 421419 Removing And Installing Support Plate (CARR. S CABRIO, CARR. CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO, Gt3, Gt3 RS) >> Removing Support Plate

Removing Support Plate

  1. Raise the vehicle at the prescribed jacking points. → 4X00IN LIFTING THE VEHICLE .
  2. Loosen fastening screws -arrows-  and remove support plate.
    Fig 1: Locating Support Plate Screws
    G09992939Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals