Loosening Rear-Axle Cross Member

Remove diagonal braces.

Fig 1: Identifying Rear-Axle Cross Member Diagonal Braces
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove connecting link at the left/right side or PDCC actuator from the anti-roll bar.

Fig 2: Identifying Anti-Roll Bar
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Loosen threaded joint on the rear-axle cross member on both sides (right side shown).

Fig 3: Identifying Rear-Axle Cross Member Threaded Joint
Courtesy of PORSCHE CARS NORTH AMERICA, INC.