Subsequent Work
- Fit brake disc.
→ Installing Front Brake Disc .
→ Information On Removing And Installing Front PCCB Brake Disc .
- Fit brake calliper. Use new fastening screws. Tightening torque 85 Nm (63 ftlb.)
- Fit wheel. → Installing Wheel .
- For all-wheel drive vehicles: Secure the drive shaft at the wheel side. Use a new lock nut. When tightening, get another mechanic to help by operating the brake.
Tightening torque 460 Nm (340 ftlb.)
- Fit cover over spring strut mount (move out of service position).
- Check wheel alignment values on the front axle and make adjustments if necessary.