Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Front drive shaft to wheel hub | Lock nut, M22 x 1.5/always use new lock nuts following removal | Tightening torque | 460 Nm (340 ftlb.) | ||
| Front drive shaft to transmission flange | Cheese head bolt, M8 | Tightening torque | 39 Nm (29 ftlb.) | ||
| Subframe No. 1 to front-axle cross member and body | Hexagon nut/hexagon-head bolt, M10 | Tightening torque | 65 Nm (48 ftlb.) | ||
| Coolant pipes to subframe | Hexagon-head bolt, M6 | Tightening torque | 10 Nm (7.5 ftlb.) |