LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Drivelines & Axles >> Axle Shafts >> 40 Front Wheel Suspension, Drive Shafts -- 911 CARRERA (991) >> WM 404119 Removing And Installing Front Drive Shaft (Except CARRERA, CARRERA S, 50-JAHRE 911, CARRERA GTS, CARRERA "Edition", CARR. CABRIO, CARR. S CABRIO, CARR. CABRIO, CARRERA Cabriolet "Edition"", CARRERA 4 "Edition, CARRERA 4 Cabriolet "Edition" >> Subsequent Work

Subsequent Work

  1. Install underbody covers.

    → 519219 REMOVING AND INSTALLING COVER FOR FRONT UNDERBODY .

    → 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY .

    → Installing Cover For Centre Underbody .

  2. On vehicles with central bolts, check the lockable wheel bolt (locking mechanism) and wheel bolt for damage. Then, insert the lockable wheel bolt -1- into the wheel hub -2-. 
    Fig 1: Inserting Lockable Wheel Bolt Into Wheel Hub
    G09992817Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Install the relevant front wheel.

    → Installing Wheel .

    → Installing Wheel With Central Bolt .

scientia non olet · About LEMON Manuals