LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (991) >> WM 536919 Removing And Installing Rear Wheel Housing Liner (All Models) >> Installing Rear Wheel Housing Liner

Installing Rear Wheel Housing Liner

The brake spoiler is installed in reverse order. Pay particular attention to the following (GT3 only): 

  1. Tighten fastening screws to the specified torque. Tightening Torque 3 Nm (2 ft. lbs.) 

    The wheel housing liner is installed in reverse order. Pay particular attention to the following: 

  2. Tighten fastening nuts to the specified torque. Tightening Torque 2.7 Nm (2 ft. lbs.) +/-0.2 Nm (+/-0.1 ft. lbs.) 
  3. Tighten fastening screws to the specified torque. Tightening Torque 2.7 Nm (2 ft. lbs.) +/-0.2 Nm (+/-0.1 ft. lbs.) 
scientia non olet · About LEMON Manuals