LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (991) >> WM 535555 Replacing Side Panel (All Models) >> Subsequent Work >> Subsequent Work For Body Repairs (Without Straightening System)

Subsequent Work For Body Repairs (Without Straightening System)

  1. Clean joint areas and sheetmetal flanges with a wire brush.
  2. Prime joint areas and sheetmetal flanges with 2K primer.
  3. Restore standard seal with body sealant → WM 5X00IN SEAM SEALS .

    Also seal the repair area carefully.

  4. Paint repair area and adjacent surfaces, if necessary.
  5. Restore standard underbody protection with underbody sealant → WM 5X00IN UNDERBODY PROTECTION .
  6. Apply standard cavity preservation → WM 5X00IN CAVITY PRESERVATION . Also apply cavity preservation to the repair area.
  7. Install removed accessories in the repair area.
scientia non olet · About LEMON Manuals