Preparing Connection Areas Of Body For Installing Side Panel

1. Remove remaining pieces of overlap.
2. Straighten connection areas of the body.
3. Sand down burrs.
4. Prepare connection areas for welding.
5. Prepare connection areas in the marked areas for bonding. → WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

Fig 1: Overview Of Welding And Bonding Areas (1 Of 2)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Fig 2: Overview Of Welding And Bonding Areas (2 Of 2)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installing side panel