Preparing Connection Areas Of Body For Installing Cross Member

Information 

• Some of the repair illustrations show only one side of the vehicle. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Drill out thread.

   → Diameter: 7.0 mm 

   Fig 1: Identifying Drilling Out Thread

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Prepare connection areas for bonding. → WM 5X00IN WORKING WITH BODY STRUCTURAL ADHESIVE

Fig 2: Identifying Connection Areas For Bonding

Courtesy of PORSCHE CARS NORTH AMERICA, INC.