LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - CARRERA (991) >> WM 534455 Replacing Cross Member (All Models) >> Preliminary Work >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

  1. Remove accessories in the repair area.
    1. 1.1. Remove accessories in the repair area according to the extent of damage to the vehicle.
  2. Set vehicle on the straightening system.
  3. Cover the accessories adjacent to the repair area on the vehicle.
    1. 3.1. Cover all accessories remaining on the vehicle and the adjacent areas with fire-proof protective covers.
  4. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminum repairs → WM 5X00IN INFORMATION ON ALUMINUM REPAIRS
  5. Expose joint areas.
  1. 5.1. Remove undersealing, paint, etc. from the joint areas of the body with a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals