LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - 911 CARRERA (991) >> WM 505619 Removing And Installing Front Wheel Housing Liner (Rear Part) (Gt3 RS) >> Installing Front Wheel Housing Liner (Rear Part)

Installing Front Wheel Housing Liner (Rear Part)

Installation is performed in reverse order. Pay particular attention to the following: 

  1. Tighten fastening screws for front wheel housing liner (rear part) to the specified torque. Tightening torque 3.2 Nm (2 ftlb.) +10 % -15 % 
scientia non olet · About LEMON Manuals