LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - 911 CARRERA (991) >> WM 505519 Removing And Installing Wing (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installing Wing >> Notes

Installing Wing: Notes

  1. Installation is performed in reverse order to removal.
  2. Screw in fastening screws and tighten to the specified tightening torque. → Tightening torque: 9.7 Nm (7.5 ftlb.)+/-0.9 Nm (+/-0.5 ftlb.) 
  3. Screw on fastening nuts and tighten to the specified tightening torque. → Tightening torque: 9.7 Nm (7.5 ftlb.)+/-0.9 Nm (+/-0.5 ftlb.) 
scientia non olet · About LEMON Manuals