LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - 911 CARRERA (991) >> WM 501055 Replacing Front Closing Panel (Except CARRERA, CARRERA S, 50 JAHRE 911, CARRERA GTS, CARRERA "Edition", CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARRERA Cabriolet "Edition", CARRERA 4 "Edition", Turbo CABRIO, Gt3) >> Preparing Front Closing Panel For Installation

Preparing Front Closing Panel For Installation

  1. Fit closing panel and secure it to the body.
    1. 1.1. Drill bores for the rivets through the existing holes. → diameter: 6.6 mm 
  2. Remove closing panel.
  3. Countersink bores for installing countersunk rivets. Countersink Nr.202 
  4. Prepare connection areas for bonding.
    Fig 1: Identifying Closing Panel For Installation
    G10005168Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals