Subsequent Work

Information 

• New parking-brake shoes and new brake discs must be grinded down. 
• Grinding down applies only to grey cast-iron brakes with one-piece brake discs. 
• There is no need to grind down grey cast-iron brakes on 911 Turbo (991) and 911 GT3 (991) vehicles because compound brake discs with aluminum brake disc hubs are installed. 
• PCCB brake discs/parking-brake shoes do not need to be grinded down. 
• It is not necessary to grind down the parking-brake shoes if the parking-brake shoes are not replaced  . Set the brake shoes to the basic setting if necessary and calibrate the brakes → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .

1. Adjust and calibrate the parking-brake shoes. → 468316 ADJUSTING AND CALIBRATING PARKING-BRAKE SHOES .

   Grind down the parking-brake shoes during adjustment and calibration if necessary.

2. Fit wheel.

   → Installing Wheel .

   → Installing Wheel With Central Bolt .