| Brake calliper to wheel carrier, front and rear axle |
M10/always use new nuts on front and rear axle following removal. |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Brake disc to wheel hub |
M6 screw |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Wheel driver pin to wheel hub (central bolt on 911 Turbo/GTS) |
Cheese head bolts, M6 x 30/always use new bolts following removal |
Tightening torque |
14 Nm (10.5 ftlb.) |
|
|
| Wheel driver pin to wheel hub (central bolt on 911 GT3) |
Cheese head bolts, M8 x 32/always use new screws following removal |
Tightening torque |
31 Nm (23 ftlb.) |
|
|