LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> 46 Brakes - Brake Mechanism -- 911 CARRERA (991) >> WM 461855 Replacing Cover Plates For Rear Brake Discs (Except CARRERA "Edition", CARRERA Cabriolet "Edition", CARRERA 4 "Edition", CARRERA 4 Cabriolet "Edition") >> Installing Cover Plates For Rear Brake Discs

Installing Cover Plates For Rear Brake Discs

  1. Clean wheel bearing housing -3-  in the contact area of the cover plate for rear brake disc -2-  .
  2. Position cover plate for rear brake disc -2-  on the wheel bearing housing -3-  .
  3. Tighten fastening screws -1-  securing cover plate for rear brake disc -2-  to wheel bearing housing -3-  . Tightening torque 10 Nm (7.5 ftlb.) 
    Fig 1: Identifying Cover Plate For Rear Brake Disc
    G09991735Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals