LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 619619 Removing And Installing Convertible Top Control Unit (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Subsequent Work

Subsequent Work

Information 

After removing and installing the convertible top control unit, the convertible top must be calibrated using PIWIS Tester II 9818  . → WM 610125 CALIBRATING CONVERTIBLE TOP .

  1. Install trim panel for convertible top compartment. → INSTALLING TRIM PANEL FOR CONVERTIBLE TOP COMPARTMENT .
  2. Install rear cover. → INSTALLING REAR COVER .
  3. Move convertible top out of service position. → 6101IN CONVERTIBLE-TOP SERVICE POSITION .
  4. Calibrate convertible top. → WM 610125 CALIBRATING CONVERTIBLE TOP .
scientia non olet · About LEMON Manuals