LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 619119 Removing And Installing Additional Flap (Module) (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Additional Flap (Module)

Installing Additional Flap (Module)

  1. Push additional flaps on both sides of the vehicle into the guide pins at the bottom.
    Fig 1: Installing Additional Flaps
    G09994654Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Further installation is performed in reverse order to removal.
  3. Tighten fastening screws to the specified tightening torque.

    Tightening torque 9.7 Nm (7.5 ftlb.) 

    Tightening torque 9.7 Nm (7.5 ftlb.) 

    Tightening torque 9.7 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals