Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screws securing additional flaps to roll-over protection system frame, top | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||
|
Fastening screws at the top |
|||||
| Fastening screws securing additional flaps to roll-over protection system frame, rear | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||
|
Rear fastening screws |
|||||
| Fastening screws securing additional flaps to roll-over protection system frame, side | Tightening torque | 9.7 Nm (7.5 ftlb.) | |||
|
Side fastening screws |
|||||
| Adjustment dimension of actuating cable | Distance | 6.6 mm | |||
| Adjusting actuating cable | |||||