Installing Actuating Cable

Information 

The metal tab is only installed on the left side of the vehicle.

1. Engage metal tab -1-  at the actuating cable -2-  .
   Fig 1: Fitting Metal Tab

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Fit actuating cable.
   Fig 2: Fitting Actuating Cable

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 2.1. Insert actuating cable -arrow A-  and press it up -arrow B-  .
   2. 2.2. Screw on collar nut.
3. Adjust actuating cable.
   1. 3.1. Adjust actuating cable to dimension -X-  by turning the collar nut. Distance 6.6 mm 
      Fig 3: Adjusting Actuating Cable

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.