LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 619119 Removing And Installing Additional Flap (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Additional Flap

Installing Additional Flap

  1. Installation is performed in reverse order to removal.
  2. Push additional flaps on both sides of the vehicle into the guide pins at the bottom.
    Fig 1: Installing Additional Flaps
    G09994642Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Tighten fastening screws to the specified tightening torque.

    Tightening torque 9.7 Nm (7.5 ftlb.) 

    Tightening torque 9.7 Nm (7.5 ftlb.) 

    Tightening torque 9.7 Nm (7.5 ftlb.) 

scientia non olet · About LEMON Manuals