LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 614519 Removing And Installing Rubber Seal With Rail (Lower Side) (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Lower Side Retaining Strip

Installing Lower Side Retaining Strip

  1. Fit retaining strip -2-  .
    Fig 1: Installing Lower Side Retaining Strip
    G09994552Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Information 

    A washer is fitted under the upper fastening point.

  2. Fit new fastening screws -3-  .
  3. Press the retaining strip down completely. -arrow A- 
  4. Tighten fastening screws to the specified tightening torque. Tightening torque 9.7 Nm (7.5 ftlb.) 
scientia non olet · About LEMON Manuals