LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 614519 Removing And Installing Rubber Seal With Rail (Front) (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Removing Front Retaining Strip

Removing Front Retaining Strip

Fig 1: Locating Front Rubber Seal With Rail Position
G09994544Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove front retaining strip.
    1. 1.1. Drill out rivets -3-  on the convertible top covering -1-  at the retaining strip -2-  from inside.
      Fig 2: Identifying Rivets On Front Retaining Strip
      G09994545Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    2. 1.2. Unscrew fastening screws -4-  .
      Fig 3: Removing Screws On Retaining Strip
      G09994546Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    3. 1.3. Remove retaining strip -2-  .