LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 613919 Removing And Installing Seal For Convertible-Top Tip (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, CARR. 4 CABRIO, CARR. 4S CABRIO, Turbo CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Seal For Convertible-Top Tip

Installing Seal For Convertible-Top Tip

Installation is performed in reverse order to removal.

  1. Tighten fastening screws to the specified tightening torque in the sequence shown. → Tightening torque: 9.7 Nm (7.5 ftlb.)+/- 1 Nm (+/-0.5 ftlb.) 
    Fig 1: Seal For Convertible-Top Screws Tightening Sequence
    G09994516Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals