Removing Upper Targa Bar Seal

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 

1. Unscrew fastening screws -1-  .
2. Remove water drains -2-  .
3. Mark installation position of seal using a water-resistant marker.
4. Guide seal out of the trim panel and remove it.
   Fig 1: Identifying Upper Targa Bar Seal

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unscrew fastening screws -1-  .
2. Remove water drains -2-  .
3. Mark installation position of seal using a water-resistant marker.
4. Guide seal out of the trim panel and remove it.
   Fig 2: Identifying Upper Targa Bar Seal

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.