Removing Side Targa Bar Seal

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 
  Fig 1: Removing Side Trim Panel Seal

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Unscrew screws -1-  .
2. Loosen seal -2-  from the trim panel and remove it.
3. Loosen foam insert -3-  from the trim panel and remove it.