Removing Lower Targa Bar Seal

Information 

• The number of fastening screws, fixing clips, plug connections, holders and trim panels can vary depending on equipment. 
• The illustrations for removing and installing the drive mechanism are shown only on one equipment variant and may differ from the actual equipment variant. 
• Some steps must be carried out automatically. 
• Some of the repair illustrations show only one side of the vehicle. 
  Fig 1: Removing Lower Trim Panel Seal

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Loosen inner seal -1-  from the trim panel and remove it.
2. Loosen foam inserts -2, 3-  from the trim panel and remove them.
3. Loosen outer seal -4-  from the trim panel and remove it.
4. Cut off rubber pins -5-  and loosen and remove seals from the trim panel.