LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> 61 - Convertible Top, Hardtop -- 911 CARRERA (991) >> WM 612419 Removing And Installing Seal For Roll-Over Bar (CARR. CABRIO, CARR. S CABRIO, CARRERA GTS CABRIO, TARGA 4, TARGA 4S, TARGA 4 GTS, CARR. 4 CABRIO, CARR. 4S CABRIO, CARR. 4 GTS CABRIO, Turbo S CABRIO) >> Installing Upper Targa Bar Seal

Installing Upper Targa Bar Seal

The upper Targa bar seal is installed in reverse order to removal. 

  1. Align the seal according to the marking made before removal.
  2. After fitting a new seal, the stoppers -1-  must be removed from the seal.
    Fig 1: Removing Stoppers From Seal
    G09994475Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals