Removing Convertible Top Lock
- Disconnect line at the convertible top lock.
- 1.1. Release plug connection -2- (-arrow A- ) and pull it off -arrow B- .
- 1.2. Cut tie-wrap -3- .
- Unscrew fastening screws -4-
and remove struts -5-
(only if fitted).
Information
Mark installation position on the roof frame with a marker before removal. -1-
- New roof frames have a bore for aligning the lock. -arrow A-
- Loosen convertible top lock.
- 3.1. Unscrew fastening screw -2- and remove tension rope -3- .
- 3.2. Unscrew fastening screws -4- .
- 3.3. Carefully remove convertible top lock -1- .
- 3.4. Disconnect plug connection -2-
on the back of the convertible top lock -1-
.
- 3.4.1. Release plug connection -2- (-arrow A- ) and pull it off -arrow B- .